E39 series BMW 5

since 1996-2001 of release

Repair and car operation



E39 BMW
+ Introduction
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Anti-blocking system
   Removal and installation of forward brake shoes
   Removal and installation of a brake disk / support of a forward brake
   Removal and installation of back brake shoes
   Removal and installation of back brake supports
   Removal and installation of a brake disk of back wheels
   Measurement of thickness of a brake disk
   Brake liquid
   Air removal from brake system
   Replacement of brake pipelines
   Replacement of a forward brake hose
   Check of the vacuum amplifier of a brake
   Removal and installation of brake shoes of the parking brake
   Adjustment of the parking brake
   Removal and installation of the lever of the parking brake
   Removal and installation of a cable of the parking brake
   Check and replacement of the switch of a stoplight
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes
+ System of onboard diagnostics





Check and replacement of the switch of a stoplight

The switch of a stoplight is in the region of feet at a support of a pedal of a brake.

 CHECK

1. If the stoplight does not light up, check first of all a safety lock. Then check filament lamps. If lamps are serviceable, check the stoplight switch.
2. Uncover around feet (over a pedal).
3. Rasstykuyte shtekerny connection of the switch of a stoplight, having compressed lock pads.
4. Include ignition.
5. Connect both contacts in the tip of the switch of a stoplight a short auxiliary wire. If thus the stoplight does not light up, replace the stoplight switch.


 REMOVAL

1. Remove the bottom cover in the left part of the region of an arrangement of feet.

2. Rasstykuyte shtekerny connection of the switch, having compressed lock pads. Address to an accompanying illustration.
3. Press a brake pedal. Pull forward (3) pusher (1) and the plug (2). Address to an accompanying illustration.
4. In this situation compress a clip (4) and extend the switch back from the holder.


 INSTALLATION

1. Insert the switch with completely extended plug into a support of a pedal and fix.
2. Insert the red safety plug into the switch so that the fillet of the plug adjoined to a pedal support.
3. Join shtekerny connection and fix it.
4. Check, whether the stoplight lights up at the included ignition.
5. Establish the bottom cover.