E39 series BMW 5

1. Open a trunk lid and remove the bottom facing. For this purpose take out rivets (1). Take out a peak (2) of an aperture of the handle and turn out the screw which was under it. Remove facing. Shooters on an illustration show the provision of clips. The damaged clips replace.

2. Cut a collar of a cable and расстыкуйте shtekerny connection.

3. Take out a bar (1).
4. Turn out nuts (2) and remove the lock (3) cylinder.
5. Disconnect the top part of the lock of a trunk lid.

1. Insert the top part of the lock of a trunk lid on a place and fix it screws. If the cylinder of the lock is replaced, rearrange the microswitch from the lock on the new. For this purpose remove a spring bracket, take out the holder and remove the microswitch.
2. Connect to the lock a driving bar.
3. Connect electric wires and fix a cable a new collar.
4. Put on a trunk lid new facing and fix it. Insert rivets and dissolve them. Fix a peak.