E39 series BMW 5

since 1996-2001 of release

Repair and car operation



E39 BMW
+ Introduction
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of a body
   Care of the panels of furnish made of vinyl
   Care of an upholstery and salon rugs
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Body gaps
   Removal and installation of a front bumper
   Removal and installation of shock-absorbers of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of the shock-absorber of a rear bumper
   Removal and installation of a forward wing
   Removal and cowl installation
   Adjustment of provision of a cowl
   Removal and trunk lid installation
   Adjustment of provision of a trunk lid
   Removal and installation of back facing of a luggage carrier
   Removal and installation of the lock of a cover of the luggage carrier/cylinder of the lock
   Removal and installation of a gas-filled emphasis of a cowl/trunk lid
   Slip replacement / firm inscription
   Removal, installation and door adjustment
   Removal and installation of facing of a door
   Removal and installation of the door lock
   Removal and installation of the external handle of a door
   Removal and installation of the cylinder of the lock
   Removal and installation of the electric motor/microswitch of the uniform lock
   Removal, installation and adjustment of door glass
   Removal and installation of an electric window regulator
   Removal and installation of an external mirror
   Removal and installation of glass of a mirror
   Removal and installation of the case of an external mirror
   Removal and installation of an internal mirror
   Removal and installation of the central console
   Removal and installation of the electric motor of the movable panel of the hatch of a roof
   Removal and installation of a forward seat
   Device of a tension of a seat belt
   Security measures at the handling of the device of a tension of a belt
   Protection of the device of a tension of a belt
   Removal and installation of a back seat
   Removal and shelf installation under a headdress
   Removal and installation of a jalousie of back glass
+ Onboard electric equipment
+ electric equipment Schemes
+ System of onboard diagnostics





Removal and installation of an external mirror

 REMOVAL

1. Remove door facing.
2. Uncover a high-frequency loudspeaker. Disconnect internal facing of a window (a tightening level) in a forward part of a window, without removing it completely. Remove penorezinovy isolation (a triangular form) from a loudspeaker.

3. Disconnect a loudspeaker (1), having shifted it up.

4. Unscrew the top screw (2).
5. Turn out the forward screw (3). For this purpose wring out rubber consolidation a little aside.

6. Remove an external mirror. For this purpose press through a cable with the tip and the plug through an opening at doors.


 INSTALLATION

1. Enter electric wires of a drive of an external mirror with the plug through an opening into doors.
2. Put an external mirror and fix it two screws the moment of 5 Nanometers.
3. Insert a loudspeaker from above through directing and fix it the moment of 5 Nanometers.
4. Put into place penorezinovy isolation (a triangular form) loudspeaker.
5. Establish internal facing in a forward part of a window. Establish a loudspeaker cover.
6. Establish door facing.