E39 series BMW 5

since 1996-2001 of release

Repair and car operation



E39 BMW
+ Introduction
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of a body
   Care of the panels of furnish made of vinyl
   Care of an upholstery and salon rugs
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Body gaps
   Removal and installation of a front bumper
   Removal and installation of shock-absorbers of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of the shock-absorber of a rear bumper
   Removal and installation of a forward wing
   Removal and cowl installation
   Adjustment of provision of a cowl
   Removal and trunk lid installation
   Adjustment of provision of a trunk lid
   Removal and installation of back facing of a luggage carrier
   Removal and installation of the lock of a cover of the luggage carrier/cylinder of the lock
   Removal and installation of a gas-filled emphasis of a cowl/trunk lid
   Slip replacement / firm inscription
   Removal, installation and door adjustment
   Removal and installation of facing of a door
   Removal and installation of the door lock
   Removal and installation of the external handle of a door
   Removal and installation of the cylinder of the lock
   Removal and installation of the electric motor/microswitch of the uniform lock
   Removal, installation and adjustment of door glass
   Removal and installation of an electric window regulator
   Removal and installation of an external mirror
   Removal and installation of glass of a mirror
   Removal and installation of the case of an external mirror
   Removal and installation of an internal mirror
   Removal and installation of the central console
   Removal and installation of the electric motor of the movable panel of the hatch of a roof
   Removal and installation of a forward seat
   Device of a tension of a seat belt
   Security measures at the handling of the device of a tension of a belt
   Protection of the device of a tension of a belt
   Removal and installation of a back seat
   Removal and shelf installation under a headdress
   Removal and installation of a jalousie of back glass
+ Onboard electric equipment
+ electric equipment Schemes
+ System of onboard diagnostics


Свежие новости: происшествия новости



Removal and installation of the electric motor of the movable panel of the hatch of a roof

 REMOVAL

1. Take out by means of a small screw-driver a lamp of internal lighting. Rasstykuyte shtekerny connection.

2. Remove a screw-driver a peak. Rasstykuyte shtekerny connection of the switch.

3. Turn out Torx screws a head of 25 mm.

4. Take out the electric drive of the panel and расстыкуйте shtekerny connection.


 INSTALLATION

1. Insert the electric drive of the panel and attach it. Fix it two short screws (2) and one the long (1) moment of 3 Nanometers. Apply surely new screws. If new screws are not present, old grease with means for LOCTITE 270 fixing.

2. Join the switch tip, establish into place a cover.
3. Join shtekerny connection of a lamp of internal lighting and put it into place.

Initialization of the movable panel of the hatch of a roof

 PERFORMANCE ORDER

1. Establish the panel in the provision of lifting, press and hold the panel switch in the Hebestellung direction (“The provision of lifting”).
2. Hold the switch in the provision of lifting during 5 with:
   a) after each switching off of a food or
   b) after panel adjustment.
3. Hold the switch in the provision of lifting during 20 with:
   a) after malfunctions in work
   b) electric drive detachments
   c) works with hummock drives.
4. Initialization is considered finished if the switch is once again pressed in the direction “Provision of lifting”.