E39 series BMW 5

since 1996-2001 of release

Repair and car operation



E39 BMW
+ Introduction
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of a body
   Care of the panels of furnish made of vinyl
   Care of an upholstery and salon rugs
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Body gaps
   Removal and installation of a front bumper
   Removal and installation of shock-absorbers of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of the shock-absorber of a rear bumper
   Removal and installation of a forward wing
   Removal and cowl installation
   Adjustment of provision of a cowl
   Removal and trunk lid installation
   Adjustment of provision of a trunk lid
   Removal and installation of back facing of a luggage carrier
   Removal and installation of the lock of a cover of the luggage carrier/cylinder of the lock
   Removal and installation of a gas-filled emphasis of a cowl/trunk lid
   Slip replacement / firm inscription
   Removal, installation and door adjustment
   Removal and installation of facing of a door
   Removal and installation of the door lock
   Removal and installation of the external handle of a door
   Removal and installation of the cylinder of the lock
   Removal and installation of the electric motor/microswitch of the uniform lock
   Removal, installation and adjustment of door glass
   Removal and installation of an electric window regulator
   Removal and installation of an external mirror
   Removal and installation of glass of a mirror
   Removal and installation of the case of an external mirror
   Removal and installation of an internal mirror
   Removal and installation of the central console
   Removal and installation of the electric motor of the movable panel of the hatch of a roof
   Removal and installation of a forward seat
   Device of a tension of a seat belt
   Security measures at the handling of the device of a tension of a belt
   Protection of the device of a tension of a belt
   Removal and installation of a back seat
   Removal and shelf installation under a headdress
   Removal and installation of a jalousie of back glass
+ Onboard electric equipment
+ electric equipment Schemes
+ System of onboard diagnostics





Removal and shelf installation under a headdress

Here shelf removal together with a jalousie of back glass is described.


 REMOVAL

1. Wring out above both facings of the S-rack and disconnect them from two clips.
2. Rasstykuyte shtekerny connection of internal lighting also put aside a cover with a lamp.
3. Disconnect below a seat belt.
4. Remove a seat back. At a back with the pass device for cargo cast away a back forward.

5. From a luggage carrier unscrew three nuts of fastening of a jalousie of back glass. Previously mark the provision of nuts. For this purpose lead round a felt-tip pen a washer.

6. Rasstykuyte shtekerny connection of a drive of a jalousie on the right in salon.
7. Remove external head restraints. For this purpose extend them completely upward, press slightly forward and back and take out upward.

Second option

 REMOVAL

1. Disconnect a peak of head restraints. For this purpose lift a peak, pull it at an angle back and up and take out forward.
2. Rasfiksiruyte a head restraint also nominate him up. For this purpose a finger through an opening in a hanger under a headdress press the lever of an unblocking and shift it forward, overcoming force a spring. The lever of blocking is on inside of an external directing core.
3. Disconnect a reception part of an average head restraint.
4. Take out peaks of belts from a hanger for a headdress and disconnect together with belts.
5. Disconnect four clips of fastening of a hanger, having unscrewed the plastic screw with a crosswise shliyets.

In the presence of the device for pass of cargo it is necessary to disconnect six clips.

6. Pull a hanger a little forward. Thus ask the assistant to press through openings screws of fastening of a jalousie of back glass in a luggage carrier. From salon pull up a jalousie for lateral openings, having at the same time pulled a cover forward. Thus, fingers of fastening of a jalousie over the resonator of loudspeakers rise.

Otherwise fingers can be hooked, and the hanger cannot be extended forward.


 INSTALLATION

1. Insert a hanger and shift it back. Thus four support of a hanger should enter in directing bodies.
2. Fix the shelf from a luggage carrier three nuts and washers according to markings (6 Nanometers).
3. Insert four or respectively six clips. Screw plastic screws.
4. Insert into a hanger for a headdress belts with peaks. Peaks fix.
5. Fix on a seat back a reception part of the central head restraint.
6. Establish a peak of head restraints if he acted in film.
7. Insert external head restraints and fix them.
8. Join shtekerny connection of a jalousie of a back seat or cast away it.

9. Fix belts (4) below a bolt (1) and a washer (2), tighten the moment of 50 Nanometers. Address to an accompanying illustration.

At installation the pad (3) should lie above.

10. Join shtekerny connection of illumination of salon and fix S-rack facing.