Body gaps
At installation of elements of a body it is necessary to observe the established gaps (width of joints between a cover and adjacent elements of a body). Otherwise there is a friction, for example, doors at its closing about a body, being accompanied unpleasant noise during movement can arise an unpleasant sound, or. The gap should have constant width on a contour of a prileganiye of details. The deviation should not exceed 1 mm.
Implementation of the following requirement is obligatory: surfaces adjoining to each other elements should be parallel. Shift inside on 1 mm of the elements located closer to a back part of the car to elements, located ahead of a body is admissible. For example, the forward edge of a back door can settle down on 1 mm more deeply, than a back edge of a forward door.
The sizes of gaps, admissible for your car, are presented in Specifications.
|