E39 series BMW 5

since 1996-2001 of release

Repair and car operation



E39 BMW
+ Introduction
+ Maintenance instruction
- Current leaving and service
   Schedule of routine maintenance
   Introduction
   Current leaving
   General information on control
   Check of levels of liquids
   Check of a condition of tires and pressure in them
   Replacement of impellent oil and oil filter
   Check and adjustment of turns of idling of the engine and level WITH
   Replacement of an element of the air filter
   Replacement of the filter of air of salon
   Check of brake system
   Visual control of the bottom and body elements
   Check of level of liquid of system of hydrostrengthening of a wheel
   Wheels and tires. Rotation, replacement, balancing and leaving. Snow chains. "Sekretki" of wheels. Elimination of trembling of a wheel
   Check of a condition and replacement of hoses of an impellent compartment
   Check of a condition of driving belts
   Check of a condition of the battery, care of it and charging. Replacement of an element of a food DU brelka
   Check and replacement of spark plugs
   Check of functioning of fuel system. Winter operation of the Diesel engine
   Check of functioning of system of cooling
   Check of a condition of system of production of the fulfilled gases
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Greasing of locking devices
   Visual check of seat belts
   Check of a condition and replacement of brushes of screen wipers
   Replacement of brake liquid
   Replacement of liquid of system of cooling. Check of frost resistance of a cooler. Visual check of system of cooling
   Sediment removal, replacement of the fuel filter. Air removal from fuel system of the diesel engine
   Replacement of transmission oil of a manual box of gear shifting
   Replacement of lubricant liquid of differential
   Check of thickness of a conducted disk of coupling
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes
+ System of onboard diagnostics





Check of a condition of system of production of the fulfilled gases

Check should be made at the cold engine therefore it is better to be engaged in it before the first trip for the present day or not earlier than in three hours after engine switching off.

 CHECK

1. Check a condition of all system of release, beginning from the engine and finishing a cut of an exhaust pipe. In an ideal this check should be carried out at the car lifted on the winch when from below to it there is a free access. If the winch is inaccessible, поддомкратьте the car and reliably establish it on support.
2. Check pipes and trumpet connections on existence of signs of leaks, strong corrosion and damages. Check a condition and reliability of fastening of all brackets and подвесов systems.
3. At the same time examine the car bottom on existence of holes, the corrosion, the dispersed seams and the other defects allowing penetration of fulfilled gases in salon of the car. Close up all openings suitable hermetic.
4. Release system, especially its support and подвесы, often are a source of a roar and other unpleasant sounds.

5. Check rubber holders on existence of a time, having turned and having stretched them. If necessary replace them. Address to an accompanying illustration.

6. Shake and pull pipes, exhaust silencers and the catalytic converter (if it is provided). If these components adjoin to elements of a body or suspension bracket details, replace fixture of system of release.
7. Knock on the catalytic converter and check, whether it adjoins somewhere to adjacent designs. If such contact is, weaken all bolts of fastening. Elements of the catalytic converter will take the places. After that again fix the catalytic converter.

Survey of an internal surface of an exhaust pipe allows to define the current working state of the engine. The structure of deposits in a pipe speaks about quality of settings of the engine. If the pipe from within black and smoked, it can indicate that it is necessary to check fuel system carefully.