E39 series BMW 5

since 1996-2001 of release

Repair and car operation



E39 BMW
+ Introduction
+ Maintenance instruction
- Current leaving and service
   Schedule of routine maintenance
   Introduction
   Current leaving
   General information on control
   Check of levels of liquids
   Check of a condition of tires and pressure in them
   Replacement of impellent oil and oil filter
   Check and adjustment of turns of idling of the engine and level WITH
   Replacement of an element of the air filter
   Replacement of the filter of air of salon
   Check of brake system
   Visual control of the bottom and body elements
   Check of level of liquid of system of hydrostrengthening of a wheel
   Wheels and tires. Rotation, replacement, balancing and leaving. Snow chains. "Sekretki" of wheels. Elimination of trembling of a wheel
   Check of a condition and replacement of hoses of an impellent compartment
   Check of a condition of driving belts
   Check of a condition of the battery, care of it and charging. Replacement of an element of a food DU brelka
   Check and replacement of spark plugs
   Check of functioning of fuel system. Winter operation of the Diesel engine
   Check of functioning of system of cooling
   Check of a condition of system of production of the fulfilled gases
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Greasing of locking devices
   Visual check of seat belts
   Check of a condition and replacement of brushes of screen wipers
   Replacement of brake liquid
   Replacement of liquid of system of cooling. Check of frost resistance of a cooler. Visual check of system of cooling
   Sediment removal, replacement of the fuel filter. Air removal from fuel system of the diesel engine
   Replacement of transmission oil of a manual box of gear shifting
   Replacement of lubricant liquid of differential
   Check of thickness of a conducted disk of coupling
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes
+ System of onboard diagnostics





Check of a condition and replacement of brushes of screen wipers

On brushes of screen wipers the road film over time collects, reducing efficiency of their work therefore brushes should be washed out regularly in soft cleaning solution.

Check

Assemblies of screen wipers with brushes should look round regularly. If survey revealed existence of hardenings or cracks on rubber of brushes, replace brushes. If at survey it is not revealed anything unusual, wet a windscreen, include screen wipers, let's to them work a little and switch off them. A non-uniform trace from brushes on glass or strips on pure glass specify that it is necessary to replace brushes.

During operation of the mechanism of screen wipers there can be a weakening of fixing nuts therefore they should be checked and necessarily to tighten each time at check of brushes.

Replacement of brushes of screen wipers

 PERFORMANCE ORDER

1. Delay screen wiper assembly with a brush from glass.

 

2. Shift the slider and remove brush assembly from the screen wiper lever.

3. If you want to replace only rubber of brushes, disconnect the brush end from a brush frame, then pull out a brush from a frame.

4. Compare a new brush with old on length, a design etc.
5. Establish a new brush into place, then insert its end into a brush frame to fix it.
6. Establish brush assembly on the lever, then moisten glass and check screen wiper work.