E39 series BMW 5

since 1996-2001 of release

Repair and car operation



E39 BMW
+ Introduction
+ Maintenance instruction
+ Current leaving and service
- Engine
   - Procedures of repair of the engine
      Compression check
      Removal and installation of the bottom guard of an impellent compartment
      Removal and engine installation
      Removal and installation of the inlet pipeline
      Removal and installation of a head of cylinders
      Removal and camshaft installation
      Removal and installation of valves
      Check of directing valves
      Processing of saddles of valves in a head cylinders / grinding in of valves
      Removal, installation and tension of a maple belt
   + System of greasing of the engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes
+ System of onboard diagnostics


Heavy Metal & Reflected



Check of directing valves

At carrying out repair of a head of the cylinders having not tight valves, there is enough processing of valves and saddles or their replacement. Besides, it is necessary to check wear of directing valves. Especially it is necessary for executing on engines with big service life. The worn-out directing exclude the correct landing of valves of m cause the raised consumption of oil. At too big wear it is necessary directing to replace on new (work HUNDRED).

 PERFORMANCE ORDER

1. Remove the valve.
2. Remove deposits on directing.
3. Insert the new valve from the combustion chamber. The end of a core should be closed by the directing.

4. Check a gap in interface, having shaken the valve.

5. For check of size of a gap put to the valve the indicator or a steel ruler. The maximum gap should not exceed 0.5 mm.
6. If a gap more, develop directing and establish repair valves with big diameter of a core (work HUNDRED).


If the directing was replaced or developed, it is necessary to process a valve saddle.