E39 series BMW 5

since 1996-2001 of release

Repair and car operation



E39 BMW
+ Introduction
+ Maintenance instruction
+ Current leaving and service
- Engine
   + Procedures of repair of the engine
   - System of greasing of the engine
      Scheme of a contour of circulation of oil
      Check of pressure of oil
      Removal and installation of the pallet of a case
      Removal, installation and check of the oil pump
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes
+ System of onboard diagnostics


Heavy Metal & Reflected



Check of pressure of oil

 PERFORMANCE ORDER

1. Check oil level, if necessary add.
2 Pass on the car, having warmed up the engine. The temperature of oil should make near +80°С.

3. The relay of pressure of the index of oil is on the case of the oil filter. Unscrew a bolt (2) uncover the oil filter that oil flew down back in the engine. Address to an accompanying illustration.

There is other design of the oil filter with a carving cover, address to the Section Replacement of impellent oil and the oil filter

4. Disconnect a cable from the relay of the index of pressure of oil (12) and turn out it.

5. Instead of the relay screw a manometer.
6. Fix a cover of the oil filter.
7. Start the engine on single turns. Pressure of oil for all engines should be not less than 0.5 bar.
8. Increase number of turns of the engine to 5000-6000 rpm. Pressure of oil should be between 4.0 (for the diesel engine 3.8) and 4.7 bar.
9. Insert the pressure relay with a new sealing ring and tighten it the moment of 20 Nanometers. Attach a cable.
10. Fix a cover on the case of the oil filter the moment of 20 Nanometers.
11. If pressure of oil differs from a preset value, address to the Section Diagnostics of malfunctions of system of greasing.