E39 series BMW 5

since 1996-2001 of release

Repair and car operation



E39 BMW
+ Introduction
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
- Engine electric equipment
   + ignition System
   + System of preheat of the diesel engine
   - Charge and start systems
      Removal and installation of the storage battery
      The low-served storage battery
      Check of the storage battery
      Self-category of the storage battery
      Charging of the storage battery
      The generator - general information
      Security measures at work with the generator
      Check of tension of a charging of the generator
      Removal and generator installation
      Check and replacement of brushes of the generator and tension regulator
      Starter
      Removal and starter installation
      Removal, check and installation of the electromagnetic traction relay
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes
+ System of onboard diagnostics


Heavy Metal & Reflected



Removal and generator installation

REMOVAL

1. Disconnect a weight cable from the storage battery. The battery is in a luggage carrier behind the right lateral facing.

At a detachment of the battery records in electronic memory are erased. Address to the Section Removal and installation of the storage battery.

2. Zaizoliruyte a tape the plug of the cable going to a negative pole of the storage battery to exclude casual contact to battery poles.

3. Remove the air filter, address to the Section Removal and installation of the case of the air filter and a measuring instrument of weight of air.

4. Remove the fan coupling, address to the Section Removal and installation of the fan and the fan coupling.

5. Remove maple a belt, address to the Section Removal, installation and a tension of a maple belt.

6. Disconnect a ventilating hose behind the generator.

7. Disconnect from a reverse side of the generator the plug D tip + for what press a stopper.

8. Uncover accessions In +. Unscrew a nut and remove a thick cover.

9. Unscrew bolts of fastening and take out the generator.


INSTALLATION

1. Establish the generator, tighten fastening bolts.
2. From a reverse side the moment of 15 Nanometers fix a cable.
3. Join shtekerny connection and fix it.
4. Put on behind the generator a ventilating hose.
5. Put on maple a belt, address to the Section Removal, installation and a tension of a maple belt. 6. Establish the fan coupling, address to the Section Removal and installation of the fan and the fan coupling.
7. Establish the air filter, address to the Section Removal and installation of the case of the air filter and a measuring instrument of weight of air.