E39 BMW + Introduction + Maintenance instruction + Current leaving and service + Engine + Systems of cooling, heating + Power supply system and release + engine Electric equipment + Manual transmission + Automatic transmission - Coupling and power shafts + Coupling + Power shafts + Brake system + Suspension bracket and steering + Body + Onboard electric equipment + electric equipment Schemes + System of onboard diagnostics
|
Coupling and power shafts
Specifications
|
Separate characteristics are provided also in the text of Head and in case of obligation of their performance are allocated with a bold print |
Coupling
Characteristic |
Value |
Type |
The one-disk dry with a diafragmenny spring |
Minimum thickness of an overlay of a disk of coupling |
7.5 mm |
Power shafts
Characteristic |
Value |
Amount of CV JOINT greasing |
|
Internal hinge |
|
• models 520 i, 525tds |
70г |
• models 523 i, 528i, 530i, 540i |
85г |
External hinge |
|
• models 520 i, 525tds |
80г |
• models 523 i, 528i, 530i, 540i |
100г |
Efforts of a tightening of carving connections
The moments of an inhaling of fixture are given in the text of Head and on some иллюстрациях*.
*vydelenny in the text a bold print the moments of an inhaling are subject to exact observance; the efforts not allocated with a bold print are given only roughly
Characteristic |
Value |
Reducer of a back axis to a beam in front |
180 Nanometers |
Reducer of a back axis to a beam behind |
105 Nanometers |
Bolts of fastening of kardanny and driving shaft to a reducer of the back bridge |
|
• A bolt with internal polyhedron М10 |
85 Nanometers |
• Bolt М10 with a gear fillet (bolts and washers are replaced) |
95 Nanometers |
• Bolt М12 |
110 Nanometers |
• Torx M10 bolt |
85 Nanometers |
•• with gear basis М8 |
65 Nanometers |
•• with gear basis М10 |
100 Nanometers |
•• with gear basis М12 |
160 Nanometers |
Nave nut with a fillet |
300 Nanometers |
|
|