E39 series BMW 5

since 1996-2001 of release

Repair and car operation

+ Introduction
+ Maintenance instruction
- Current leaving and service
   Schedule of routine maintenance
   Current leaving
   General information on control
   Check of levels of liquids
   Check of a condition of tires and pressure in them
   Replacement of impellent oil and oil filter
   Check and adjustment of turns of idling of the engine and level WITH
   Replacement of an element of the air filter
   Replacement of the filter of air of salon
   Check of brake system
   Visual control of the bottom and body elements
   Check of level of liquid of system of hydrostrengthening of a wheel
   Wheels and tires. Rotation, replacement, balancing and leaving. Snow chains. "Sekretki" of wheels. Elimination of trembling of a wheel
   Check of a condition and replacement of hoses of an impellent compartment
   Check of a condition of driving belts
   Check of a condition of the battery, care of it and charging. Replacement of an element of a food DU brelka
   Check and replacement of spark plugs
   Check of functioning of fuel system. Winter operation of the Diesel engine
   Check of functioning of system of cooling
   Check of a condition of system of production of the fulfilled gases
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Greasing of locking devices
   Visual check of seat belts
   Check of a condition and replacement of brushes of screen wipers
   Replacement of brake liquid
   Replacement of liquid of system of cooling. Check of frost resistance of a cooler. Visual check of system of cooling
   Sediment removal, replacement of the fuel filter. Air removal from fuel system of the diesel engine
   Replacement of transmission oil of a manual box of gear shifting
   Replacement of lubricant liquid of differential
   Check of thickness of a conducted disk of coupling
+ Engine
+ Systems of cooling, heating
+ Power supply system and release
+ engine Electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ electric equipment Schemes
+ System of onboard diagnostics

Replacement of transmission oil of a manual box of gear shifting

The tools necessary for this work, include support for car maintenance in the lifted condition, a face key for an otdavaniye of a drain stopper, drain capacity, newspapers and pure rags. It is necessary to prepare also necessary amount of transmission oil (address to the Section “Types and volumes of applied greasings and liquids” Specifications).

Replacement of RKPP oil is made each 80 000 km within carrying out maintenance. In intervals it is necessary to check RKPP on tightness and to supervise oil level in it. Level should reach the bottom edge of a jellied mouth.

Transmission oil merges in a hot condition (i.e. right after a trip on the car); from hot oil pollution easier are removed. Works are better for making in rubber gloves.


1. To Poddomkratta the car and reliably establish it on support. Try to establish the car as it is possible more exactly. Remove the bottom guard of an impellent compartment, address to the Section Removal and installation of the bottom guard of an impellent compartment.
2. Place the necessary equipment under the car, trying not to concern hot components of final system.

3. Turn out a stopper of a jellied mouth (1) on RKPP. Address to an accompanying illustration.
4. Substitute capacity and turn out a drain stopper (2) under RKPP.

5. Let's to oil flow out completely. Carefully clear a drain stopper, then establish it and reliably tighten.

At all do not pour out oil together with a household waste.

6. Screw a drain stopper and tighten it the moment of 50 Nanometers.
7. Fill transmission by new oil, then establish a cover of a bulk mouth and reliably tighten it.
8. Lower the car on the earth. Establish the bottom guard of an impellent compartment Having passed the first some kilometers, check, whether the drain stopper proceeds.

Watch to pouring some oil above level of the bottom edge of a jellied mouth.

9. Tighten a stopper of a jellied mouth the moment given in Specifications.